To Next PageTo Next PageWhat does “ERROR” mean on my JVC KD-X260BT Car Video System?
If your JVC Car Video System displays “ERROR”, try the operation again. If “ERROR” appears again, check if the device supports the function you have tried.
What does “CHECK ANTENNA” mean on my JVC KD-X260BT?
If your JVC Car Video System displays “CHECK ANTENNA”, check that the antenna and its connection are in good condition.
What does “CHECK TUNER” mean on my JVC KD-X260BT?
If your JVC Car Video System displays “CHECK TUNER”, make sure the SiriusXM Vehicle Tuner is connected to the unit.
How to fix no Bluetooth device detected on my JVC KD-X260BT Car Video System?
If no Bluetooth device is detected on your JVC Car Video System: 1. Search from the Bluetooth device again. 2. Reset the unit.
How to fix pairing cannot be made on my JVC KD-X260BT?
If pairing cannot be made on your JVC Car Video System: 1. Make sure you have entered the same PIN code to both the unit and Bluetooth device. 2. Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
What to do if my JVC Car Video System displays “USB ERROR”?
If your JVC Car Video System shows “USB ERROR”, turn the power off and on again, or reset the unit. If the problem continues, try using a different USB device.
How to fix unstable Bluetooth connection between the Bluetooth device and the unit on my JVC KD-X260BT Car Video System?
To fix an unstable Bluetooth connection between the Bluetooth device and the unit on your JVC Car Video System, delete the unused registered Bluetooth device from the unit.
Why does my iPod/iPhone not work with my JVC Car Video System?
If your iPod/iPhone does not turn on or work with the JVC Car Video System, check the connection between the unit and your device. If the problem persists, disconnect and reset the iPod/iPhone using a hard reset.
Why does my JVC KD-X260BT Car Video System say “CANNOT PLAY”?
If your JVC Car Video System displays “CANNOT PLAY”, connect a USB device that contains playable audio files.
What does “MISWIRING CHECK WIRING THEN PWR ON” mean on my JVC Car Video System?
If your JVC Car Video System displays “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Check to ensure the terminals of the speaker wires are insulated properly, then turn the power on again.
General| Brand | JVC |
|---|---|
| Model | KD-X260BT |
| Bluetooth | Yes |
| Max Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Display Type | LCD |
| DIN Size | 1 DIN |
| USB Port | Yes |
| Auxiliary Input | Yes |
| Tuner | AM/FM |
| Compatible Formats | MP3, WMA |
| Steering Wheel Control | Yes (with adapter) |
Instructions for resetting the unit to its default settings.
Steps to disable the product's demonstration mode.
Guide to setting the unit's internal clock and date.
Configuration of fundamental system and source settings.
How to find and tune into radio stations.
How to connect and play media from USB, iPod, or Android.
Guide to activating and beginning SiriusXM service.
Information on connecting Bluetooth devices.
How to connect the external microphone.
Steps for initial Bluetooth pairing.
Handling calls and device connections.
Playing audio content via Bluetooth.
Adjusting sound equalization with presets or custom settings.
Advanced sound adjustment for specific frequencies.
Configuring audio output for speakers or lineout.
Detailed settings for 2-way and 3-way crossovers.
Digital Time Alignment for sound staging.
Common issues and their solutions.
Troubleshooting for radio reception and playback.
Issues related to USB and iPod/iPhone connectivity.
Troubleshooting for Android device connectivity and playback.
Issues related to SiriusXM reception and activation.
Common Bluetooth connection and audio issues.
Important safety warnings for installation.
Precautions and recommendations for safe installation.
Step-by-step guide for unit installation.
Detailed steps for in-dash installation.
Instructions for installing without a mounting sleeve.
Diagram and guide for connecting wires.
How to connect microphones and amplifiers.
Wiring amplifiers to the unit's output terminals.
