EasyManuals Logo

JVC KD-X272BT Quick Start Guide

JVC KD-X272BT
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
1
Cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1 Press the volume knob.
[YES]
is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
2
Set the clock and date
1 Press and hold .
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCKADJUST]
, then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”.
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6 Turn the volume knob to select
[12H] or [24H]
, then press the knob.
To set the date
7 Turn the volume knob to select
[DATESET]
, then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year”.
9 Press to exit.
To return to the previous setting item, press
.
3
Set the basic settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[CLOCK DISPLAY]
[ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
[ENGLISH]
Select the display language for menu and music information if
applicable.
By default, [ENGLISH] is selected.
[РУССКИЙ]
[ESPANOL]
[FRANCAIS]
[DEUTSCH]*
* Only for KD-X372BT.
JS_JVC_QSG_KD_X372BT_E_EN.indd 5JS_JVC_QSG_KD_X372BT_E_EN.indd 5 9/7/2019 5:15:20 PM9/7/2019 5:15:20 PM

Other manuals for JVC KD-X272BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X272BT and is the answer not in the manual?

JVC KD-X272BT Specifications

General IconGeneral
DIN size-
Output power400 W
Product colorBlack
Volume controlRotary
High pass filterYes
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
Maximum power per channel50 W
Audio formats supportedAAC, FLAC, MP3, SBC, WAV, WMA
Display typeLCD
Bluetooth version4.2
USB port positionFront
Bluetooth profilesA2DP, AVRCP, PBAP
Line outputs (RCA)1
USB connector typeMini-USB A
Bluetooth functionsHandsfree calling
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Package width900 mm
AM band range153 - 531 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Weight and Dimensions IconWeight and Dimensions
Weight600 g

Related product manuals