To Next Page
T
Tracy BennettSep 8, 2025
Why source cannot be selected on JVC KD-X130 Receiver?
- JJonathan RichardsonSep 8, 2025
If a source cannot be selected on your JVC Receiver, check the [SRC SELECT] setting.
Why source cannot be selected on JVC KD-X130 Receiver?
If a source cannot be selected on your JVC Receiver, check the [SRC SELECT] setting.
What to do if sound cannot be heard during playback on JVC Receiver?
If you can't hear sound during playback on your JVC Receiver, try the following: * Reconnect the Android device. * If in [AUDIO MODE], launch any media player application on the Android device and start playback. * If in [AUDIO MODE], relaunch the current media player application or use another media player application. * Restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
How to improve radio reception on JVC KD-X130?
To improve radio reception on your JVC Receiver, ensure the antenna is firmly connected.
What does “LICENSE ERR” mean on JVC Receiver?
The message “LICENSE ERR” on your JVC Receiver means that you are trying to access from a country where Pandora is not deliverable.
What does “UPDATE APP” mean on JVC Receiver?
If your JVC Receiver displays “UPDATE APP”, make sure you have installed the latest version of the iHeart Link for JVC application on your device.
What does “STATION NOT SELECTED” mean on JVC KD-X130 Receiver?
The message “STATION NOT SELECTED” on your JVC Receiver means that no station is selected.
Why are correct characters not displayed on JVC KD-X130 Receiver?
This unit can only display uppercase letters, numbers, and a limited number of symbols. The displayed characters may also depend on the display language you have selected.
What does “PROTECTING SEND SERVICE” mean on JVC KD-X130 Receiver?
Send the unit to the nearest service center.
What does “NOT CONNCTD” mean on JVC KD-X130?
The message “NOT CONNCTD” on your JVC Receiver means that link to the application is impossible.
Why does my JVC Receiver say “CANNOT PLAY” and not detect the device?
If your JVC Receiver displays “CANNOT PLAY” and/or the connected device cannot be detected, verify that the connected device is compatible with the unit and that the files are in supported formats. You can also try reattaching the device.
General
