J
Joshua HansonSep 2, 2025
What to do if JVC Receiver says “NOT SUPPORT” and file skips?
- SSheri LeeSep 2, 2025
If your JVC Receiver displays “NOT SUPPORT” and the file skips, check whether the file is a playable format.
To Next PageTo Next PageWhat to do if JVC Receiver says “NOT SUPPORT” and file skips?
If your JVC Receiver displays “NOT SUPPORT” and the file skips, check whether the file is a playable format.
How to stop “READING” from flashing on JVC Receiver?
If “READING” keeps flashing on your JVC Receiver, avoid using too many hierarchical levels and folders. You can also try reattaching the USB device.
Why are correct characters not displayed on JVC KD-X130 Receiver?
This unit can only display uppercase letters, numbers, and a limited number of symbols. The displayed characters may also depend on the display language you have selected.
What does “PROTECTING SEND SERVICE” mean on JVC KD-X130 Receiver?
Send the unit to the nearest service center.
Why JVC KD-X130 Receiver cannot playback at [AUTO MODE]?
If your JVC Receiver cannot playback in [AUTO MODE], make sure the JVC MUSIC PLAY APP is installed on your Android device. Also, try reconnecting the Android device and selecting the appropriate control mode. If the issue persists, the connected Android device may not support [AUTO MODE].
What causes intermittent playback or sound skipping on JVC Receiver?
If you are experiencing intermittent playback or sound skipping on your JVC Receiver, try turning off the power saving mode on your Android device.
What to do if JVC KD-X130 displays “CANNOT PLAY”?
If your JVC Receiver displays “CANNOT PLAY”, ensure your Android device contains playable audio files. You can also try reconnecting or restarting the Android device.
How to fix “NO DEVICE” or “READING” flashing on JVC Receiver?
If your JVC Receiver displays “NO DEVICE” or “READING” keeps flashing, try switching off the developer options on the Android device and reconnect the Android device. If the problem persists, the connected Android device may not support [AUTO MODE].
What to do when JVC Receiver flashes “CANNOT PLAY” and doesn't detect the connected device?
If your JVC Receiver flashes “CANNOT PLAY” and doesn't detect the connected device, verify that the connected device is compatible with the unit and that the files are in supported formats. You can also try reattaching the device.
Why my iPod/iPhone does not turn on or does not work with JVC Receiver?
If your iPod/iPhone does not turn on or work with the JVC Receiver, check the connection between the unit and the iPod/iPhone. If that doesn't work, detach and reset the iPod/iPhone using a hard reset.
General
