Why I can't hear sound during JVC KD-X130 playback?
If you can't hear any sound during playback on your JVC Receiver, try reconnecting the Android device. If in [AUDIO MODE], launch any media player application on the Android device and start playback.
Why source cannot be selected on JVC KD-X130 Receiver?
If a source cannot be selected on your JVC Receiver, check the [SRC SELECT] setting.
Why does my JVC Receiver say “CANNOT PLAY” and not detect the device?
If your JVC Receiver displays “CANNOT PLAY” and/or the connected device cannot be detected, verify that the connected device is compatible with the unit and that the files are in supported formats. You can also try reattaching the device.
What does “CREATE ERR” mean on JVC Receiver?
The message “CREATE ERR” on your JVC Receiver means that custom station name creation was unsuccessful.
Why is the playback order not as intended on JVC Receiver?
The playback order on your JVC Receiver is determined by the file name.
What does “STATION NOT SELECTED” mean on JVC KD-X130 Receiver?
The message “STATION NOT SELECTED” on your JVC Receiver means that no station is selected.
What does “LICENSE ERR” mean on JVC Receiver?
The message “LICENSE ERR” on your JVC Receiver means that you are trying to access from a country where Pandora is not deliverable.
What to do if “MISWIRING CHECK WIRING THEN PWR ON” appears on JVC Receiver?
If you see the message “MISWIRING CHECK WIRING THEN PWR ON” on your JVC Receiver, turn the power off immediately. Check the speaker wires to ensure the terminals are properly insulated. After checking, turn the power back on.
How to fix JVC KD-X130 when no sound is coming out?
If you can't hear any sound, first, make sure to adjust the volume to an optimal level. If that doesn't work, check the cords and connections to ensure they are properly connected.
How to improve radio reception on JVC KD-X130?
To improve radio reception on your JVC Receiver, ensure the antenna is firmly connected.
To Next Page
General
