JVC KD-X480BHS

ENGLISH
33
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Audio Settings
Determining the delay time automatically
If you specify the distance from the currently set
listening position to every speaker, the delay time
will be automatically calculated.
1 Set [POSITION] and determine the listening
position as the reference point (the reference
point for [FRONT ALL] will be the center
between the right and left in the front seats).
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance between the furthest
speaker (subwoofer on the illustration) and
other speakers.
4 Sets the [DISTANCE] calculated in step 3 for
individual speakers.
5 Adjusts [GAIN] for individual speakers.
Example: When [FRONT ALL] is selected as the
listening position
*1 Before making an adjustment, select the speaker:
When 2-way crossover is selected:
[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]:
– [REAR LEFT] , [REAR RIGHT] and [SUBWOOFER] is selectable only if a setting other than
[NONE] is selected for [REAR] and [SUBWOOFER] of [SPEAKER SIZE] . (Page 31)
When 3-way crossover is selected:
[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]:
– [WOOFER] is selectable only if a setting other than [NONE] is selected for [WOOFER] of
[SPEAKER SIZE] . (Page 31)
*2 Displayed only when [X ' OVER TYPE ] is set to [2-WAY] (page 29) and if a setting other
than [NONE] is selected for [REAR] of [SPEAKER SIZE]. (Page
31 )
Display Settings
Zone identification for brightness settings
Zone identification for color settings
1 Press and hold .
2 Turn the volume knob to select an item (page34), then press the
knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 33KD-X480BHS_K_B5A-3881-00_EN_2nd Draft.indd 33 25/8/2021 3:38:03 PM25/8/2021 3:38:03 PM