To Next PageTo Next PageWhy is voice calling method not successful on my JVC KD-X482BT Receiver?
If voice calling is unsuccessful on your JVC Receiver: * Use voice calling in a quieter environment. * Speak closer to the microphone when saying the name. * Ensure you use the same voice as the registered voice tag.
Why can't I hear the phone call sound from the car speakers on my JVC KD-X482BT Receiver?
If you cannot hear the phone call sound from the car speakers on your JVC Receiver, press during a call to switch between hands-free and private talk mode.
Why is the phone sound quality poor on my JVC KD-X482BT Receiver?
If the phone sound quality is poor on your JVC Receiver: * Reduce the distance between the unit and the Bluetooth device. * Move the car to a location with better signal reception.
How to fix echo or noise during a phone conversation on my JVC KD-X482BT?
To reduce echo or noise during a phone conversation on your JVC Receiver: * Adjust the microphone unit’s position. * Check the [ECHO CANCEL] setting.
What does 'SWITCHING NG' mean on my JVC KD-X482BT?
The message 'SWITCHING NG' indicates that the connected phones might not support the phone switching feature.
What does 'H/W ERROR' mean on my JVC KD-X482BT and what should I do?
The message 'H/W ERROR' suggests resetting the unit and trying the operation again. If the error persists, consult your nearest service center.
What to do if my JVC KD-X482BT Receiver displays 'NO DEVICE'?
If your JVC Receiver displays 'NO DEVICE', try the following: * Connect a device (USB/iPod/iPhone), and change the source to USB/iPod USB again. * Reset the iPod. * Turn the power off and on again for error recovery by pressing and holding B SRC.
What does 'ERROR' mean on my JVC KD-X482BT Receiver?
The message 'ERROR' suggests trying the operation again. If the error persists, verify that the device supports the function you are attempting to use.
What does 'NO ENTRY' mean on my JVC KD-X482BT?
The message 'NO ENTRY' indicates that there is no registered device connected or found via Bluetooth.
What does 'NOT SUPPORT' mean on my JVC KD-X482BT Receiver when using Bluetooth?
The message 'NOT SUPPORT' when using Bluetooth indicates that the connected phone does not support the Voice Recognition feature or phonebook transfer.
General| Category | Receiver |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Pre-Out Voltage | 2.5V |
| Display Type | LCD |
| Remote Control | Yes |
| Tuner | AM/FM |
| EQ Settings | 13-band graphic EQ |
| Steering Wheel Control | Yes |
| Built-in Microphone | Yes |
| Compatible Audio Formats | MP3, WMA, FLAC |
Ensure proper use by reading manual, observing warnings and cautions.
Do not operate functions distracting from safe driving.
Adjust volume to hear outside sounds to prevent accidents.
Avoid hindering safe driving; back up data; prevent short circuits.
Avoid hot places; risk of fire/explosion if battery replaced incorrectly.
Overview of KD-X482BT/KD-X282BT faceplates and controls.
Controls for power, volume, source selection, and display information.
Procedure to reset the unit after detaching the faceplate.
Unit can be remotely controlled with an optional remote control.
Step-by-step guide for replacing remote control battery.
Remote operations for volume, mute, and source selection.
Initial setup for crossover type acknowledgement and demo cancellation.
Steps to set clock/date, including format and time sync.
Procedure to set date in Day, Month, Year order.
Guide to setting System, Source Select, FW Update, Factory Reset, Clock, Demo Mode.
How to search FM, AM, SW1, or SW2 stations manually/automatically.
How to store and select preset radio stations.
Steps to store a station to a preset number.
Select stored station using number buttons or volume knob.
Accessing and setting tuner options like Radio Timer.
Details various radio settings like SSM, Local Seek, IF Band, Mono Set, News Set, Regional, AF Set, TI, PTY Search.
How to connect a USB device to the unit.
How to connect an iPhone/iPod to the unit.
Operations for source selection, file navigation, repeat, and random play.
How to select music drive when using USB source.
Steps to select a file to play from a folder or list.
Quick search for files if many are present.
Alphabet search for files by first character.
Select [ON] for [BUILT-IN AUX] in [SOURCE SELECT].
Connect portable audio player and start playback via AUX.
Install the latest JVC Remote app before connecting.
Start app, connect device, and select it for use.
How to select app device (iOS/Android) and check connection status.
Supported Bluetooth profiles and codecs.
How to connect the supplied microphone.
Step-by-step guide to pair a Bluetooth device with the unit.
Operations for receiving and handling calls.
Auto Pairing activated when iPhone/iPod connects via USB.
Call operations via faceplate and remote control.
Adjust MIC GAIN, NR LEVEL, ECHO CANCEL for better call quality.
Settings for receiving calls, including Bluetooth mode and options.
Settings for Auto Answer, Ring Color, and Ring Illumination.
How to make calls from history, phonebook, or by dialing.
Use voice recognition to make calls or control phone functions.
Store up to 6 contacts into number buttons.
Make call to a registered number using number buttons.
Settings for Phone Select, Audio Select, Device Delete, PIN Edit, Reconnect, Auto Pairing, Initialize, Info.
Check Bluetooth device and unit profile connectivity.
Operations and display for audio playback via Bluetooth.
Listen to audio player via Bluetooth.
Listen to iPod/iPhone songs via Bluetooth.
Select preset equalizer for music genre.
Adjusts user sound settings, stored to [USER] in [PRESET EQ].
Adjusts source-specific sound settings, stored to [USER] in [PRESET EQ].
Settings for Bass Boost and Loudness.
Settings for Subwoofer, Fader, Balance, Volume, Amp Gain, Speaker Output, Size, and Crossover Type.
Settings for Space Enhance, Sound Response, and Sound Lift.
Selects speaker output setting based on connection method for 2-way crossover.
Connect speakers via lineout terminals for external amplifier.
Connect speakers via speaker leads without external amplifier.
Available setting items for 2-way and 3-way crossover.
Selects speaker size; auto-sets frequency/slope.
Adjusts crossover frequency and slope for speakers.
Details of speaker size, crossover frequency, slope, and gain for 2-way crossover.
Details of speaker size, crossover frequency, slope, and gain for 3-way crossover.
Sets speaker delay time for optimal vehicle audio environment.
Settings for Position, Distance, Gain, and DTA Reset.
Identifies car type and rear speaker location for DTA adjustment.
How delay time is automatically calculated by specifying speaker distances.
Identifies zones for brightness settings (KD-X482BT/KD-X282BT).
Identifies zones for color settings (KD-X482BT).
Controls dimmer settings: ON/OFF, Dimmer Time, Auto Dimmer.
Sets brightness for day and night separately for each zone.
Controls text scrolling: once, auto, or off.
Stores custom day/night illumination colors for different zones.
Stores custom night illumination colors for different zones.
Changes zone illumination colors to white under certain settings.
Info shown on supplementary display when Bluetooth device connected.
Selects illumination colors for buttons on different zones.
Instructions for cleaning the unit and its connectors.
Find latest firmware, applications, and other info.
Lists playable audio file formats for USB devices.
Notes on USB device compatibility, connection, and power requirements.
Lists compatible iPod/iPhone models and potential function limitations.
How to change the information displayed on the screen.
Details of info displayed for FM/AM/SW1/SW2, USB, iPod, BT Audio, AUX.
KD-X282BT: Details of info displayed for FM/AM/SW1/SW2, USB, BT Audio, AUX.
Solutions for no sound, wiring errors, protect service, source selection, character display.
Solutions for poor radio reception or static noise.
Solutions for playback order, time errors, unsupported files, reading errors.
Solutions for unsupported/unresponsive devices, USB hubs, playback errors, loading issues.
Solutions for Bluetooth pairing, echo/noise, poor sound, call problems.
List of parts included for installation.
Step-by-step guide for installing the unit.
Safety warnings: power supply, battery disconnection, short circuit prevention.
Precautions during installation: hot parts, speaker connections.
Instructions for in-dash unit mounting.
Install unit without mounting sleeve.
Steps to remove the unit from the dashboard.
Diagram and instructions for connecting wiring harness.
Recommend professional installers for safety and proper installation.
Connect external amplifiers via output terminals.
Technical specifications for FM and AM tuner sections.
Technical specifications for USB connectivity and file compatibility.
Detailed specs for MP3, WMA, AAC, WAV, FLAC decoding.
Technical specs for auxiliary input, frequency response, and impedance.
Technical specs for Bluetooth version, frequency range, communication range.
Technical specs for audio output power and speaker impedance.
Detailed specs for crossover settings (frequency, level, Q).
Articles 1-8 covering General Provision, License, Conditions, Rights, Indemnification, Liability, Confidentiality, and Termination.
User must destroy licensed software and related documents upon termination.
Copyright/IP rights belong to licensor; user must comply with laws.
Prohibits exporting software and documents outside user's country.
Handles invalid provisions, ambiguity resolution, and governing law.
Copyright notices and permissions for software from Petri Lehtinen and Dave Gamble.
