EasyManua.ls Logo

JVC KW-ADV65BT Firmware Update

JVC KW-ADV65BT
1 page
Page #1 background imageLoading...
Page #1 background image
Firmware update
The  rmware for the following products has been updated.
Models: KW-ADV65BT, KW-AV61BT, KW-AV61, KW-AV51
This update the corresponding iPhone App was added.
Update Procedure:
1. Download the  rmware update  le AV61_NSX_DVD_V0002.zip” and save it on your desktop.
2. Unzip it on to your desktop.
In the unzipped folder, you will see two  les WUGFMU_XS2_51.SWP” and “VUP_info.cds”.
3. Copy these two  les onto USB  ash drive. Do not save them into any folder.
4. Insert USB  ash drive into the DVD receiver’s USB cable. (See  g1)
USB cable from the
rear of the unit
EN_KW-AV61JJW.indb 24 12/11/08 17:07
( g1)
5. On the <Setting> screen, press “System, “down key”, and “Enter” of the System Information. (See  g2)
EN_KW-AV61JJW.indb 50 12/11/08 17:07
( g2)
6. Press “Update” of the DVD Version to start update. It takes almost two minutes. (See  g3)
EN_KW-AV61JJW.indb 50 12/11/08 17:07
( g3)
0001
G20.00.00
7. When the update has been completed successfully, “Update Completed” appears and the unit is reset.
8. After this update, the DVD Version in the System Information will be changed to “0002”.
Other instructions please see the instruction manual.
© 2013 JVC KENWOOD Corporation

Other manuals for JVC KW-ADV65BT

Questions and Answers:

JVC KW-ADV65BT Specifications

General IconGeneral
Resolution800 x 480 pixels
BluetoothYes
USB Ports1
AUX InputYes
DVD PlayerYes
CD PlaybackYes
Preamp Outputs3 (front, rear, subwoofer)
Radio TunerAM/FM
GPS NavigationNo
Steering Wheel Control CompatibleYes
Rear View Camera InputYes
Audio Formats SupportedMP3, WMA
Video Formats SupportedMPEG-1, MPEG-2
Power Output50W x 4
Equalizer13-band
RMS Power Output22W x 4 Channels

Related product manuals