JVC KW-M150BT - Basics; Functions of the Buttons on the Front Panel; Common Operations

4
BasicsBasics
Functions of the Buttons on the
Front Panel
1
2
3
4
5
6
1
Remote Sensor
• Receives the remote control signal.
2
(HOME)
• Displays the HOME screen. (P.5)
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
3
EQ
• Displays the Audio screen.* (P.17)
* The Audio screen is not displayed during SETUP
screen or on the list screen etc,
4
+ , – (Volume)
• Adjusts volume. The volume will go up until 20
when you keep pressing [ + ].
5
(MUTE, Display o)
• Mutes/restores the sound.
• Pressing for 1 second turns the screen off.
When the screen is off, touch the display to turn
on the screen.
6
Reset
• If the unit or the connected unit fails to operate
properly, the unit returns to factory settings
when this button is pressed.
Common operations
Ñ Turning on the power
1 Press the < > button.
Ñ Turning o the power
1 Press and hold the < > button.
Ñ Adjusting the volume
1 Press the <+> or <–> button.
✎ NOTE
• The volume will go up until 20 when you keep
pressing [ + ].
Ñ Mutes the sound
1 Press the < > button.
⿠To restore the sound, touch the button again, or
adjust the volume.
Ñ Turn o the screen
1 Press and hold the < > button.
⿠To turn on the screen, touch the display.
19KWM_M_Ref_1En.indd 4 2019/07/16 8:53