Tuner
23English
Traffic Information (FM only)
You can listen and watch the traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio Broadcast
Data System that includes the TI information.
1 Touch [ ] on the left side of the screen.
Touch [TI].
Traffic information mode is set.
Ñ When the traffic bulletin starts
The Traffic Information screen appears
automatically.
Tuner Setup
You can set tuner related parameters.
1 Touch [ ] on the left side of the screen.
Touch [SETUP].
Tuner SETUP screen appears.
2 Set each item as follows.
■ AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
■ RDS CT
Synchronizing the Radio Data System station
time data and this unit’s clock.
“ON” (Default), “OFF”
!B5A-2246-20_JVC_EnFr_2nd.indb 23 2019/06/14 14:05
To Next Page
Loading...
