JVC KW-M875DBW - Tuner SETUP

Tuner
35English
Tuner SETUP (FM only)
You can set tuner related parameters.
1
Touch [ ] on the left side of the screen.
Touch [SETUP].
 Tuner SETUP screen appears.
2
Set each function as follows.
■ [NEWS]
Sets a news bulletin interrupt time. Default
is “OFF”.
■ [AF]
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
■ [Regional]
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON”.
■ [Auto TP Seek]
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
■ [Language Select]
Selects a display language for the PTY
function.
■ [Area Setting]
The tuner channel interval changes
depending on the area where you use this
unit.
[Europe] (Default): Select this when using
this unit in Europe. FM and AM intervals
are set to 50 kHz and 9 kHz respectively.
[Asia/Middle East]: Select this when using
this unit in any other areas. FM and AM
intervals are set to 50 kHz and 9 kHz
respectively.