JVC KW-V130BT - BLUETOOTH - Pairing Methods; Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0)

ENGLISH 39
BLUETOOTH
BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the Home screen:
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page42)
2 Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 15.
• Press [Clear] to delete the last entry.
3 Search for the unit (“JVC KW-V”) from
your Bluetooth device.
4 Select the unit (“JVC KW-V”) on your
Bluetooth device.
• If a PIN code is required, enter “0000” (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the device
on the <Paired Device List>. (Page40)
2017KW-VEntryK.indb39 2016/06/0221:22