JVC KW-V320BT - Tuning in only FM stations with strong signals-Local Seek; Presetting stations

28
TUNER
TUNER
❏ Tuning in only FM stations with strong
signals — Local Seek
1 Display the <Tuner Mode> screen.
2
The unit tunes in only to stations with sufficient
signal strength. The LO.S indicator lights up.
To deactivate Local Seek: Press [OFF].
❏ Setting the antenna control
You can store the antenna automatically when the
source is changed from the tuner to another source.
• The antenna is extended regardless of the setting
when the source is the tuner.
1 Display the <Tuner Mode> screen. (See
the left column.)
2
[ON] Select this to keep the antenna
extended even when the source is not
the tuner.
[OFF] Select this to store the antenna
automatically.
Presetting stations
❏ Storing stations in the memory
You can preset 5 stations for each band.
Automatic presetting — SSM (Strong-station
Sequential Memory)
(Hold)
The local stations with the strongest signals are
found and stored automatically.
Manual presetting
1 Tune in to a station you want to preset.
(Page 27)
2 Select a preset number.
(Hold)
The station selected in step 1 is stored.
2016KW-VEntryM.indb 282016KW-VEntryM.indb28 2015/09/15 15:522015/09/1515:52