OTHER EXTERNAL COMPONENTS
Using the external navigation
unit
(Only for KW-V420BT/KW-V420BTM/
KW-V320BT Region 3/KW-V320BTM/KW-
V220BT Region 3/KW-V220BTM/KW-V520BT
Region3/KW-V520BTM)
You can connect a navigation unit (commercially
available) to the NAV input terminal so that you can
view the navigation screen. (Page 63 )
• The navigation guidance comes out of the front
speakers even when you are listening to an audio
source.
❏ Viewing the navigation screen
Preparation:
Select [RGB] for <Input> in <Navigation Input>
screen. (See the far right column.)
On the monitor panel:
KW-V420BT
KW-V420BTM
KW-V320BT
KW-V320BTM
KW-V220BT
KW-V220BTM
KW-V520BT
KW-V520BTM
• While the navigation screen is displayed, the touch
panel operations are available only for navigation.
• The aspect ratio of the navigation screen is fixed
to <FULL> regardless of the <Aspect> setting
(Page47).
When receiving a call during navigation guidance
The screen is switched automatically. To return to
the navigation screen, press [
].
To exit the navigation screen
Press HOME or DISP (for KW-V420BT/KW-V420BTM)/
(for KW-V320BT/KW-V320BTM/KW-V220BT/
KW-V220BTM/KW-V520BT/KW-V520BTM) on the
monitor panel.
❏ Settings for the navigation unit
1 Display the <Input> setting screen.
On the Home screen:
2 Display the <Navigation> screen.
3
<Input> Select the source screen
displayed when DISP (for
KW-V420BT/KW-V420BTM)
or
(for KW-V320BT/
KW-V320BTM/KW-V220BT/
KW-V220BTM/KW-V520BT/
KW-V520BTM) on the monitor
panel is pressed.
• RGB: Switches to the
navigation screen from the
connected navigation unit by
pressing the button. (See the
far left column.)
• iPhone: Switches to the
screen of App from the
connected iPod touch/iPhone
by pressing the button.
(Page24)
• OFF: Deactivates the display
switch function.
<Output> Select which front speakers
are used for the navigation
guidance.
<Volume> Adjust the volume of the
navigation guidance. (0 to 35)
2016KW-VEntryM.indb 342016KW-VEntryM.indb34 2015/09/15 15:522015/09/1515:52
To Next Page
Loading...
