JVC KW-V320BT - Pairing a Bluetooth device using a PIN code (for Bluetooth 2.0)

36
BLUETOOTH
BLUETOOTH
Pairing a Bluetooth device using a PIN code (for
Bluetooth 2.0)
1 Display the <Bluetooth Setup> screen.
On the Home screen:
• You can also display the <Bluetooth Setup>
screen by pressing [
] on the phone control
screen. (Page39)
2 Change the PIN code.
• If you wish to skip changing the PIN code, go
to step 3.
• The PIN code is initially set to “0000”.
• The maximum number of digits in the PIN
code is 15.
• Press [Clear] to delete the last entry.
3 Search for the unit ( “Car Multimedia”)
from your Bluetooth device.
4 Select the unit ( “Car Multimedia”) on your
Bluetooth device.
• If a PIN code is required, enter “0000” (initial).
When pairing is complete, the device is listed on
the <Paired Device List>.
• To use the paired device, connect the device
on the <Paired Device List>. (Page37)
2016KW-VEntryM.indb 362016KW-VEntryM.indb36 2015/09/15 15:522015/09/1515:52