JVC KW-V320BT - Using a Bluetooth mobile phone; Receiving a call

38
BLUETOOTH
BLUETOOTH
Using a Bluetooth mobile phone
❏ Receiving a call
When a call comes in...
• Call information is displayed if acquired.
• Phone operation is not available while the
picture from the rear view camera is displayed.
(Page 31)
To reject a call
When <Auto Answer> is set to [ON] (Page 42)
The unit answers incoming calls automatically.
When receiving a call during navigation
guidance (only for KW-V420BT/KW-V420BTM/
KW-V320BT Region 3/KW-V320BTM/KW-V220BT
Region 3/KW-V220BTM/KW-V520BT Region3/
KW-V520BTM)
The screen is switched automatically. To return to
the navigation screen, press [
].
❏ Ending a call
While talking...
❏ Adjusting the volume of calls/earpiece/
microphone
While talking...
• You can adjust the volume level between -10 to 10
(initial: -4).
• Use the monitor panel to adjust the call/earpiece
volume. (Page 8)
❏ Switching between handsfree mode
and phone mode
While talking...
Each time you press the button, the talking method
is switched (
: handsfree mode / : phone
mode).
❏ Adjusting the noise reduction/echo
cancel level
While talking...
• To adjust the noise reduction volume (between
−5 to 5, initial: 0) : Adjust <NR LEVEL>.
• To adjust the echo volume (between −5 to 5,
initial: 0): Adjust <EC LEVEL>.
13Bluetooth.indd 3813Bluetooth.indd38 2015/11/12 15:272015/11/1215:27