JVC KW-V420BT - TUNER & SATELLITE RADIO

26
TUNER TUNER
Listening to the radio
❏ Indications and buttons on the source
control screen
2
345
1
Tuner reception information
1 Text information
• Pressing [H] scrolls the text if not all of the text
is shown.
• Pressing [Radio Text] switches the information
between Radio Text, Radio Text Plus, and PTY
code.
2 The station frequency currently tuned in
3 TI indicator
4 ST/MONO indicator
• The ST indicator lights up when receiving an
FM stereo broadcast with sufficient signal
strength.
5 Seek mode
Operation buttons
[ ]/[ ] *
1
Displays the other operation button
window.
• To hide the window, press [ ]/
[ ]*
1
.
[AM] Selects the AM band.
[FM] Selects the FM band.
[ ]*
2
Displays the preset station window.
(Page27)
• To hide the window, press [ ].
[P1] – [P5] • Selects a stored station. (Press)
• Stores the current station. (Hold)
[
]
Displays the <Equalizer> screen.
(Page47)
[PTY]*
3
Enters PTY search mode. (Page28)
[SEEK] Changes the seek mode.
• AUTO1: Auto Search
• AUTO2: Tunes in stations in the
memory one after another.
• MANU: Manual Search
[S] [T]
Searches for a station.
• The search method differs
according to the selected seek
mode. (See above.)
[SSM
]*
3
Presets stations automatically. (Hold)
(Page27)
[MONO]*
3
Activates/deactivates monaural mode
for better FM reception. (Stereo effect
will be lost.)
• The MONO indicator lights up while
monaural mode is activated.
[TI]*
3
Activates/deactivates TI standby
reception mode. (Page28)
• To display all available operation buttons, press
[
]/[ ]*
1
to display the other operation button
window.
*
1
The appearance of the buttons differs depending on the model:
[ ] or [ ] for KW-V420BT /KW-V220BT/KW-V120BT /[ ] or [ ]
for KW-V320BT .
*
2
Only for KW-V420BT /KW-V220BT/KW-V120BT .
*
3
Appears only when FM is selected as the source.
2016KW-VEntryK.indb262016KW-VEntryK.indb26 2015/09/2510:482015/09/2510:48