JVC KW-V420BT - Page 42

42
BLUETOOTHBLUETOOTH
❏ Sending text during a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
While talking...
❏ Switching between two connected
devices
When 2 devices are connected, you can change the
device to use.
While using a Bluetooth mobile phone, select the
device you want to use.
• The active device is highlighted.
❏ Making a call
1 Display the phone control screen.
On the Home screen:
For KW-V420BT /KW-V220BT/KW-V120BT :
For KW-V320BT :
• Only for KW-V320BT : You can also display the
phone control screen by selecting [Phone] on
the pop-up short-cut menu (Page11).
2 Select a method to make a call.
1
2
3
4
5
1
From the call history*
2
From the phone book*
3
From the preset list
• To preset, see page44.
4
Direct number entry
5
Voice dialing
• You can display the <Bluetooth Setup>
screen by pressing [
].
* When the mobile phone is not compatible with Phone Book
Access Profile (PBAP), the call history and the phone book are not
displayed.
From the call history/phone book/preset list
1
[ ]
From the call history (missed calls/
received calls/dialed calls)
[ ]
From the phone book
[ ]
From the preset list
2 Select the target (1), then make a call (2).
• You can change the page to display more
items by pressing [ ]/[ ].
13Bluetooth.indd4213Bluetooth.indd42 2015/11/1110:022015/11/1110:02