JVC KW-V820BTM - Page 32

32
BLUETOOTH
Auto pairing
When <Auto Pairing> is set to [ON], iOS devices
(such as iPhone) are automatically paired when
connected via USB. (Page40)
Pairing a Bluetooth device from the target device
1 Search for the unit (“KW-V820BT/
KW-V820BTM”) from your Bluetooth
device and operate the device to register.
For a Bluetooth device compatible with SSP
(Bluetooth 2.1):
Confirm the request both on the device and the
unit.
012345
OK
KENWOODBT
MM-8U2
PINcode
OK
0000
• Touch [No] to reject the request.
For a Bluetooth device compatible with
Bluetooth 2.0:
Select the unit (“KW-V820BT/KW-V820BTM”)
on your Bluetooth device.
• If a PIN code is required, enter the PIN code
shown on the screen (initial: “0000”).
– To change PIN code, see page34.
2 Determine usage as a mobile phone.
• To use the Bluetooth device as a mobile
phone, select the hands free number ([Hands
Free1] or [Hands Free2]) to connect the
device for.
• When you do not want to use the Bluetooth
device as a mobile phone, select [No
Connection.].
• To close the window, touch [Close].
3 When your Bluetooth device is compatible
with A2DP or SPP: Determine usage as
an audio player or a device with Apps
installed.
• To use the device as an audio player, touch
[Yes].
• When you do not want to use the Bluetooth
device as an audio player, touch [No].
4 When your Bluetooth device is compatible
with PBAP: Select whether to transfer the
phonebook of your Bluetooth device to
the unit or not.
• To transfer the phone book from your
Bluetooth device, touch [Yes].
• When you do not want to transfer the phone
book, touch [No].