JVC KW-V820BTM - Page 55

ENGLISH 55
SETTINGS
❏ <Camera> setting screen
[R-CAM Interruption]
• ON (Initial): Displays the picture from the rear view
camera when you shift the gear to the reverse (R)
position.
• OFF: Select this when no camera is connected.
[Parking Guidelines]
• ON (Initial): Displays the parking guidelines to
enable easier parking when you shift the gear to
the reverse (R) position.
• OFF: Hides the parking guidelines.
[Guidelines Setup]
Adjust the parking guidelines. (Page28)
❏ <Special> setting screen
[DEMO]
• ON (Initial): Activates the demonstration on the
screen.
• OFF: Cancels.
[SETUP Memory]
Locks or unlocks the Audio SETUP Memory/Recall/
Clear. (Page52)
[Audio SETUP Memory]
Memorizes the current audio setting. (Page52)
[Audio SETUP Recall]
Recalls the memorized audio setting. (Page52)
[Audio SETUP Clear]
Clears the AUDIO SETUP Memory and the currently
memorized audio setting. (Page52)
[Software Information]
Display the version information of the software. You
can update the software.
[Open Source Licenses]
Show the Open Source Licenses.
[Initialize]
Touch [Initialize] and then touch [Yes] to set all the
settings to the initial default settings.
* Audio SETUP Memory is not initialized.
❏ <Bluetooth> setting screen
[Bluetooth]
• ON (Initial): Activates the Bluetooth function of
the unit.
• OFF: Cancels.
[Select Device]
Connect or disconnect the paired device.
(Page33)
[Device Name]
Display/change the device name to be shown on the
Bluetooth device. (Page34)
[PIN Code]
Change the PIN code of the unit. (Page34)
[Device Address]
Display the device address of the unit.
[TEL SETUP]
Configure the setting for using a Bluetooth mobile
phone. (Page40)
❏ <Navigation> setting screen (Only for
KW-V820BTM)
[NAV Voice Volume]
Adjust the volume of the navigation guidance.
(Page30)