JVC KW-V820BTM - Page 64

64
CONNECTION/INSTALLATION
❏ Connecting external components
VIDEO OUT
REAR VIEW CAMERA
1 HDMI/MHL input
2 Video output (Yellow)
3 Rear view camera input (Yellow)
4 Audio Video input (AV-IN)
5 AV-OUT/Audio output (ø3.5 mini jack)
Resistance-free stereo type mini plug
6 Front preout*
1
• Audio left output (White)
• Audio right output (Red)
7 Subwoofer preout (monaural output)*
1
• Subwoofer left output (White)
• Subwoofer right output (Red)
8 Rear preout*
1
• Audio left output (White)
• Audio right output (Red)
9 Steering wheel remote controller input
• Connect to the vehicle’s steering remote
harness using the Steering Remote cable (7).
Contact your JVC dealer for details.
p NAV I/F input*
2
*
1
When connecting an external amplifier, connect its ground wire to
the chassis of the car; otherwise the unit may be damaged.
*
2
Only for KW-V820BTM.
Connecting external amplifiers for 3 way
speakers system
Tweeter preout
Mid range preout
Woofer preout
RCA cable (not supplied)
Speaker
*
* When connecting to an external amplifier, connect its ground wire
to the car’s chassis.