JVC KW-X840BTS - External Component Integration; Connecting External Components; Amplifier Connections Guide

ENGLISH
45
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Installation/Connection
Connect external components
No Part
1
For KW-X840BTS: MIC (Microphone input terminal) (page 19)
2
Output terminals (See the following “Connect external amplifiers via output terminals”.)
3
For KW-X840BTS:
Expansion port (12 V
500 mA): To the optional SiriusXM Vehicle Tuner (commercially
available). (Page 15)
4
For KW-R940BTS: Microphone input jack (page 19)
5
For KW-R940BTS:
Expansion port (12 V
500 mA): To the optional SiriusXM Vehicle Tuner (commercially
available). (Page 15)
Connect external amplifiers via output terminals
JVC Amplifier*
Signal cord (not supplied)
Output terminals
To remote lead (blue/white) of the
wiring harness. (Page 44)
Remote wire (not supplied)
* Firmly connect the ground wire of the amplifier to the car’s chassis to avoid damaging the unit.
Output terminals 2-way crossover 3-way crossover
REAR: Rear output Tweeter output
FRONT: Front output Mid Range output
SW: Subwoofer output Woofer output
JS_JVC_KW_R940BTS_K_EN_1.indd 45JS_JVC_KW_R940BTS_K_EN_1.indd 45 7/11/2019 3:25:39 PM7/11/2019 3:25:39 PM