E6
Instruction book
Features
● This digital camera uses three 1.45 million pixel 1/2 inch 3-CCD.
● Newly developed 1/2 inch C mount Dichroic prism for the colour separation prism.
● The semi-animation of 1360 × 1024 pixels can be output with analog signal (7.5 frames/sec-
ond) and the still picture of 1360 × 1024 pixels can be captured.
● Image capturing capability using a capture board since video signals are processed in real-
time by the built-in DSP and outputted as RGB analog signals of 7.5 frames/sec.
● Monitor output can be scan-converted to 640 × 480 pixels for output to a VGA monitor.
● Using the provided special application software [KY-SCSI] allows connection of a personal
computer via SCSI connection for remote control, display of preview image and capture of still
images.
● Output digital still images to an MO drive, Zip
®
drive or compatible printer using SCSI connec-
tion.
● Remotely control your PC using RS-232C connection. (software not included)
Accessories and attachments
Battery (CR2025)
For time and date backup
( page 16)
Replace the battery once two
year.
Power cable (2 m)
For connecting with AC
adapter 8-pin cable
( page 18)
Remote plug (10-pin)
REMOTE terminal plug
( page 12)
Clamp filter
For power cable
( page 18)
C
R
2
0
2
5
Mini screwdriver
For replacing battery
( page 16)
1. Introduction
For details, see the “Readme.txt”
file of the software
( page 66)
Wire clamp (5 units)
For clamping rear cables, etc.
Floppy disk (3 disks)
Special application software
[KY-SCSI] and TWAIN driver
To Next Page
Loading...
