JVC KY-F70B - 2 Before Recording; Basic System 1

E14
Compatible Printer
(Mitsubishi CP-700DSU/E)
CP-770DW
CP-800DW
AC ADAPTER AA-P700
ON
OFF
POWER
POWER
ALARM SHEET
PAPER
DATA
OPEN
CP700DSA MITSUBISHI
ONLINECOPY
AA-P700
AC
MONITOR VIDEO IN
SCSI
DC IN
KY-F70B
CAMERADIGITAL
C-MOUNT
& CUTPAPER FEED
2. Before recording
Basic system 1
While checking the images from the camera on the monitor, output the images to an MO disk,
Zip
®
disk or printer.
• Be sure to terminate the last device on the SCSI bus.
• For the power supply, always use the AA-P700 AC adapter.
Connect to the
power supply
(  page 18)
AC adapter
Connect the PC monitor (VGA)
(  page 19)
VGA monitor
Connect the MO/Zip
®
drive (  page 20)
MO drive
or Zip
®
drive
Connect the printer
(  page 21)
CAUTION
Use a 1/2 inch C mount microscope adapter compatible to the used microscope.
To avoid damage to the unit, always use an adapter that is 4mm or less from
the lens mount side.
Microscope
adapter
4mm or less
Adapter