JVC LET0141-002A - The Front Panel; Adjusting the Picture to Suit the Preferences; Adjusting the Picture to Suit Preferences; To Adjust the Picture Quality - VFP

50
DVD VIDEO Operations
XV-D701BK [C] EN
LET0141-002A
To adjust the picture quality [VFP]
7 During playback
1
Press
VFP
or
VIDEO FINE
PROCESSOR
on the front panel.
2
Within 10 seconds, select
the desired picture quality
by pressing
VFP
or
VIDEO FINE
PROCESSOR
on
the front panel.
Each time you press the button, the
picture quality changes as follows:
Adjusting the picture to suit preferences
You can adjust the picture quality depending on the disc contents.
The selected picture quality tab
lights up in yellow.
If you select [MANUAL], you can
adjust the level of picture
sharpness and noise reduction.
1. Use to select
SHARPNESS or NR LEVEL.
2. Use to adjust the level.
Toward L : Reduce the effect.
Toward H : Enhance the effect.
NOTES
¶
To erase the VFP screen, press
ENTER
.
¶ The VFP screen disappears if there are no operations for more than 10
seconds.
NORMAL
SHARP
SOFT
MANUAL
SOFT MANUAL
LH
NR LEVEL
SHARPNESS
LH
SHARPNORMAL
Adjusting bar