What to do if my JVC LT-24G20 has no picture and no sound?
If your JVC LCD TV shows no picture and emits no sound, try the following: Ensure the TV is switched on and properly connected to the mains power outlet. Select the correct input mode. You can also try unplugging the unit for one minute, then plugging it back in. Press 1 on the remote control to ensure that the unit is not set to AV mode. Also, connect or try another antenna.
Why does my JVC LCD TV automatically go to standby mode?
Your JVC LCD TV might be going into standby mode because, as a normal function, the set will change to standby mode 15 minutes after the antenna or external input signal has disappeared (or after 2 minutes in PC input mode).
Details the function of each indicator and control button on the TV.
Step-by-step guide for inserting batteries into the remote control.
Details the various input/output ports on the back of the TV.
How to choose the active input signal source for connected devices.
Covers channel selection, list, info, quickview, muting, and still picture.
Sets up a password to lock specific channels.
How to select different aspect ratios (4:3, 16:9, Cinema, Real).
Configuration options for connecting a PC to the TV.
To Next Page
General
