Exit
1
2
3
4
5
6
7
select
Display the menu
Select “DTV”
Select an item
Switch to digital channels
Finish
Change setting
1 select
2 next
1 select
2 next
Using DTV menu
Menu Item Adjustments / Confi gurations
DTV
Timer
Reserve a programme to record / watch (P. 27)
Edit PR
Edit / Delete / Lock registered digital channels or add them to favourites.
(P. 45)
Confi guration
Country
Confi rm the country of installation (P. 39)
Menu Language
Confi rm the language for on-screen menus (P. 39)
Audio Language
Select the default language for audio (P. 39)
Subtitle Language
Select the default language for subtitle (P. 39)
Enter PIN Code
Change PIN code (P. 39)
Favourite Mode
Enable your favourite channels (P. 39)
Setup
Digital Audio Output
When the Dolby Digital signal is received, you can select to output the
signal from the DIGITAL AUDIO OUTPUT terminal. (P. 41)
Banner Duration
Select the display time for channel information (2 sec / 5 sec / 8 sec)
Receiver Upgrade
Upgrade your tuner software as newer versions becomes available. (P. 41)
Common Interface
Set Conditional Access Module (P. 41)
Antenna Power
Power supply for the indoor aerial (P. 41)
Installation
Service Scan
Register channels (P. 43)
Signal Check
Check the broadcast signal (P. 43)
Factory Settings
Initialise the DTV settings (P. 43)
Select “Setup”
select
Digital channels original function and setting can be selected from the DTV menu.
E.g. “Antenna Power”
E.g. “Antenna Power”
When watching digital channels or changing DTV menu settings, it may be necessary for you to
enter a PIN code.
Once a PIN code has been entered, there is no need to enter it again until the TV is turned off.
You can set your own PIN code. “Enter PIN Code” (P. 39)
When entering the PIN code
LT-42DA8BJ_EN.indb 35-36LT-42DA8BJ_EN.indb 35-36 2/13/2007 4:51:27 PM2/13/2007 4:51:27 PM