13
ENGLISH
English
Deutsch
Step 1: Please select Language 1/3
Français
Italiano
Castellano
Català
Nederlands
Dansk
Svenska
Norsk
Menu Language
Austria
Switzerland
Step 2: Please select Country 1/2
Czech Republic
Germany
Denmark
Spain
Finland
France
United Kingdom
Italy
Country
German
Step 3: Please select Language
System Language
Home
Shop with Auto Demo.
Step 4: Please select Place of Installation
Place of Installation
On
Off
Step 5: Please select Antenna Power
Antenna Power
Etc.AdvancedBasicsGetting started
The initial settings will begin automatically when the TV is turned on for the
very rst time. Follow the on-screen instructions to perform the settings.
1
Turn on
If the remote control doesn’t work, conrm that the mode is set to
“TV”.
If the “Menu Language” does not appear, refer to “Factory Setting”
(P. 34) or “Retuning” (P. 34) for channel settings.
2
Select a Menu language
Select a language for on-screen displays.
Select the country of installation. Receivable digital channels will differ
depending on the “Country” setting.
2 set
1 select
2 set
1 select
Initial settings
3
Select a country *
4
Select a system language
Select a language for audio, subtitle, and EPG.
The system language will differ depending on selected country.
2 set
1 select
5
Select place of installation
Select “Home”, for use at home.
2 set
1 select
6
Set antenna power
Conrm that the aerial power supply is set to “Off”. Select “On” only
when using an aerial which requires external power. (P. 12)
2 set
1 select
The power lamp on the TV lights
Note
* To select a country that not listed, refer to (P. 1).
To Next Page
Loading...
Need help?
General
