JVC LT-32DP9BU - Page 18

17
ENGLISH
Subtitle Selection
Off
English
Audio Selection
English
Audio Selection
English
Etc.AdvancedBasicsGetting started
View subtitles (Digital channel only)
2 set
1 select
Off
: Don’t display
By default, the language set in “System Language” (P. 29) is
automatically selected.
When not broadcast in that language, another broadcast language is
automatically selected.
When no subtitles are broadcasted, “No Subtitles” is displayed.



: Special subtitles for the hearing impaired
Undened : When the subtitle’s language cannot be identied
The language that can be selected depends on the broadcast.
Select audio language (Digital channel only)
By default, the language set in “System Language” (P. 29) is automatically
selected.
When not broadcast in that language, another broadcast language is
automatically selected.
Switch to another language
: Special audio track for the visually impaired
: Special audio track for the hearing impaired
Undened: When the audio’s language cannot be identied
Dolby: Dolby Digital
The language that can be selected depends on the broadcast.
Please read ““Dolby Digital” output from the DIGITAL AUDIO OUT
terminal” (P. 40) before selecting “Dolby”.
You can adjust the mix level of Bilingual t and Bilingual u sound for
visually impaired. To display mix level, select “Special audio track for the
visually impaired” and then press during volume control.
* Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.



2 set
1 select