JVC LT-32FV130 - Assembling; Attaching the Stand; Mounting on a Wall

EN-7
ASSEMBLING
Attaching the Stand
CAUTION: When
attaching the stand to the
TV set, place the screen
facing down on a
cushioned table or flat
surface to protect the
screen from scratches.
Mounting on a Wall
CAUTION:
 Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
 The distance between the holes is 200 x 100
mm in width and height.
 Tighten the screws (M6x10mm) firmly to
prevent the TV from tilting forward. Do not
over tighten.