JVC LT-32FV130 - Troubleshooting

EN-31
TROUBLESHOOTING
Problem
Possible Solution
The screen does not
appear/illuminate.
1. Check that the power plug is securely into the mains
socket.
2. Check the power is on.
The screen appears, but there
is no sound.
1. Press the MUTE button.
2. Increase the sound level by pressing the volume
adjustment buttons.
3. Check that the sound terminal of your external input is
connected properly.
4. Check that the audio cables are connected properly.
5. Select and check any other input.
Noise or poor picture
Stop using wireless telephones, hair dryers or other
electrical appliances near the TV.
The remote control does not
work.
1. Check if the TV is not switched on.
2. Check that the batteries of the remote control are inserted
properly.
3. Check for any obstacles between the TV remote sensor
and the remote control. Remove them if necessary.
4. If the batteries have no power, replace them with two new
batteries off the same type.