What to do if my JVC LCD TV has no picture and no sound?
First, ensure the TV is switched on and properly connected to the mains power outlet. Then, select the appropriate input mode. If the issue persists, unplug the unit for one minute and then plug it back in.
Why are the colors wrong on my JVC LT-32G3?
Color and brightness errors can occur if the viewing angle or ambient air temperature (see technical specifications) are exceeded.
What to do if the channel option cannot be selected on my JVC LT-32G3 LCD TV?
The unit might be set to AV mode. Try pressing '1' on the remote control.
How to fix no reception on my JVC LCD TV with built-in tuner?
Make sure the antenna is connected properly. If the problem continues, try using a different antenna.
Why does my JVC LT-32G3 LCD TV switch off when the antenna or external input signal is missing?
This is normal behavior. Your JVC LCD TV is designed to enter standby mode 15 minutes after the antenna or external input signal is lost (or after 2 minutes in PC input mode).
Describes connecting a TV to a receiver/set-top box using a component video cord.
Details the connection process for a VCR to the TV using video/audio cables.
Explains how to connect video cameras or game consoles to the AV input.
Describes connecting a TV to a receiver/set-top box using a component video cord.
Details the connection process for a VCR to the TV using video/audio cables.
Explains how to connect video cameras or game consoles to the AV input.
To Next Page
General
