14
Other convenience functions
Selected Items Setup hint
TIME
Sleep Timer Sleep Timer switches the TV to standby after a defined
period of time.
To cancel the Sleep Timer, set to “Off”.
Off/10/20/30/40/50/60/90/120/240 min
Auto Sleep When the Set and Remote key operation are not
operated with specified period by this setting(3/4/5 H),
the power status is changed to stand by mode
automatically.
Off/3/4/5 H
OSD Timer OSD is cleared automatically as per this setting.
“CH LIST” OSD will disappear after 10 seconds in
spite of this setting.
•
5/10/15/20/25/30 S
OPTION
OSD Language See page 10.
TT Language See page 11.
Aspect Ratio See page 12.
Blue Screen On: You can set the TV to automatically change to a
blue screen and mute the sound if the signal is weak or
absent.
On / Off
Key Lock You can lock the panel buttons to prevent your settings
from being changed accidentally (by children, for example).
When the Key Lock is in On, all control buttons on the TV
panel do not operate.
On / Off
First Time Installation See page 9.
Reset Press or ENTER to enter the Reset to Default screen.
Press to select “Yes”. Reset the TV function will now begin.
Software Update (USB) Upgrade the software with the USB drive.
SCREEN
Auto Adjust “Horizontal Pos.”, “Vertical Pos.”, “Clock” and “Phase” are
adjusted automatically as per the input PC video signal.
When PC-input mode was selected and a PC-
signal was input, Auto Adjust will be performed
automatically.
•
Horizontal Pos. To adjust the horizontal placing of the image.
Vertical Pos. To adjust the vertical placing of the image.
Clock Eliminates the vertical (Clock) interfering lines.
Phase Eliminates the horizontal (Phase) interfering lines.
3IZ0101C_EN.indd 143IZ0101C_EN.indd 14 10/21/11 12:05:39 PM10/21/11 12:05:39 PM
To Next Page
Loading...
Need help?
General
