8
2 Preparation
Unpacking the TV
Remove all packaging from the TV. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Thank you for purchasing your new JVC TV.
Your new TV has many features and incorporates the latest technology to enhance your viewing
experience. We recommend that you spend some time reading this instruction manual so that you fully
understand these features. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Chapter
2
Remote Control /
AAA Batteries x 2
Stand screws x8
Instruction Manual Quick Start Guide
FAV Cable
Instruction Manual
40" LED Smart HD TV with built-in DVD player
LT-40C755(A)
GB
• Do notconnecttheTVtothemainssupplyuntilyouhavecompletedalltheconnections.
• Al waysdisconnecttheTVfromthemainssocketwhennotinuseforalongperiodoftime.
• The
buttonontheremotecontrolisonlyusedforswitchingtheTVintostandby,itdoesnot disconnecttheTVfromthemainspower.
Tocompletelydisconnectthemainspower,pleaseremovethemainsplug fromthemainssocket.
PleaseinspectyourTVfordamageafterunpacking.Ifyoudonoticeany damagepleaseconsultyourdealer.
Removeallpackagingfromtheunit.Retainthepackaging.Ifyoudisposeofitpleasedosoaccordingtoanylocalregulations.
Unpacking
1
1. ConnectoneendoftheRFcoaxialcabletotheaerialsocketonthewall
andtheotherendofthecabletotheANTsocketonthebackofyourTV.
2. PlugtheTVintoamainssocketandswitchonatthemains.
3. Instandbymode,pressthe
buttonontheremotecontroltoturnthe
TVon.TheLEDindicatorwillashforafewsecondsthentheTVwill
switchon.
Connecting the Aerial and Turning on the TV
4
1. Slideopenthebatterycompartmentonthebackoftheremotecontrol.
Operating Your Remote Control
2
Thank youforpurchasingyournewJVCTV.
YournewTVincorporatesthelatesttechnologytoenhanceyourviewing
experience.Wewouldsuggestthatyouallowabout20minsforinitialsetup.
Pleasefollowthisguideforasuccessfulrsttimeinstallation.
Thelatesteco-friendlypower-savingtechnologywillswitchotheTVif
itisleftonandidlefor4hours.Pleasereferto“AutoStandby”underthe
“TimeSettings”sectionoftheinstructionmanualformoredetail.
Quick Start Guide
40" LED Smart HD TV
with built-in DVD player
LT-40C755(A)
2. InserttwoAAAsizebatteries.Makesuretomatchthe(+)and(-)
endsofthebatterieswiththe(+)and(-)endsindicatedinthebattery
compartment.
3. Slidethebatterycompartmentcoverbackintoplace.Makesureitclicks
intoplace.
Optional
Ifyouwanttoconnecttotheinternetviaa wiredconnection
thenconnectyourethernetcabletotheLANsocket.
SCART
SPDIF
Optic.OUT
VGA
ANT.
HDMI 1
(ARC)
HDMI 2
HDMI 3
LAN
SCART
SPDIF
Optic.OUT
VGA
ANT.
HDMI 1
(ARC)
HDMI 2
HDMI 3
LAN
RF coaxial cable
(not included)
SCART
SPDIF
Optic.OUT
VGA
ANT.
HDMI 1
(ARC)
HDMI 2
HDMI 3
LAN
TheLCDdisplayisvery fragile,andmustbeprotectedatalltimeswheninstallingandremovingthebasestand.Besurethatnohard orsharpobject,
oranythingthatcouldscratchordamagetheLCDdisplay,comesinto contactwithit.DONOTexertpressureonthefrontof theTVatanytimebecause
thescreencouldcrack.
Fitting the Stand to the TV
3. EnsuretheTVisswitchedoandnotconnectedtothemainspowersupply.
4. LaytheTVdownonaatsurfaceideallyontheedgeofatablesothebaseofthe
TVslightlyoverhangstheedgeofthetable,withthebacksidefacingup.Please
makesureasoftcushionedmaterial(suchasadrybathtowelorthickpieceof
foam)isplacedbeneaththescreen.
5. Slidethestandunderthelip,theneckwilltsnuglyoverthescrewholes.Then
screwthestandtotheTVusingthe4screwssupplied.
Fitting the Stand Neck and Base Together
1. Fittheneckontothebase.
2. Using4ofthesuppliedscrews,screwthenecktothebase.
Installing the Base Stand
3
Slide under
the lip
Table
Cushioned
material
TV
TVStandNeck
TVStandBase
RemoteControl/
AAABatteriesx2
Screwsx8
FAVCable
InstructionManual
QuickStartGuide
LT-40C755(A)_QSG.indd 1 25/08/2015 12:10
TV
TV Stand Neck TV Stand Base