6
OK
OK
OK
OK
OK
OK
1. Select
2. Set
OK
1. Select
2. Set
OK
1. Select
2. Set
OK
Select
1
MENU
> Edit
PR
ID CH/CC
01 CH 02
02 CH 03
03 CH 07
04 CH 76
05 CH 12
06 CH 09
07 CH 05
08 CH 02
09 CH 15
10 CH 28
Set Up
> Channel Summary
CH/CC
ID Skip
CH 02
CH 03
CH 04
CH 05
CH 06
CH 07
CH 08
CH 09
CH 10
CH 11
Set Up
Set Up
> Teletext Language
Group-1
Group-2
Group-3
Group-4
Group-5
Group-6
Set Up
> Auto Program
Air
Cable
Set Up
> Country Area
Area - 1
Area - 2
> Language
English
Укрaїнcькa
ﻲﺑ ﺭﻋ Castellano
Français Melayu
Pуccкий ﻰﺴ ﺮ ﻔ
中文
Português
ไทย
Tiếng Việt
Set Up
Set Up
> Auto Program
50%
CH 40
Set Up
>> Auto Program
50%
CH 40
If you want to edit channel, see •
“Registering / Editing channels” (P. 7)
If you want to set undesired channels •
to be skiped, see “Channel Summary”
(P. 7)
See “Language group for Teletext” (P. 17).
•
Initial Settings
Show only when powering on for the fi rst time.•
The power on the unit can also be used.•
The select the new Country Area after Initial Setting has completed.•
Area-1 : Asia, Middle East, Europe, Oceania, Africa
Area-2 : South America, Philippines
(While the cursor is pointing to Picture menu and hold
for 3 seconds.)
1 Turn on the TV.
4 Select the Teletext language group. 4 Select Air or Cable.
2 Select a language. 3 Select Country Area.
5 Automatically register channels (Auto Program).
5 Searching for the channels (Auto Program).
6 Check what was registered.
6 Check what was registered.
JVC logo appears
If you select Country Area to “Area-1” If you select Country Area to “Area-2”
GGT0372-001A-H-EN.indd 6GGT0372-001A-H-EN.indd 6 13/07/2010 16:54:1313/07/2010 16:54:13
To Next Page
Loading...
Need help?
General
