10
Press the
buttons to adjust the volume.
The volume indicator appears and the volume changes as
you press the buttons.
Muting the sound
Press the
(muting) button to turn off the
sound.
Pressing the
(muting) button again returns the
previous volume level.
Watch images from external equipment
Use the AV button:
Press the AV button to choose an EXT
terminal.
In the PC mode:
If following
You can enjoy Surround with a "live" effect by using the
Hyper Surround function.
ON:
Hyper Surround function is turned on.
OFF:
Hyper Surround function is turned off.
message appears, the power lamp lights in amber
and the TV goes in to reduced power mode.
"NO SIGNAL"
Displaying the source information
You can display the source information and current time on the
screen.
Press the
(information) button to display the
source information
Pressing the (information) button changes the display as
follows:
•
•
•
•
•
The source information and current time switched by
(information) button.
• The source type
TV/DTV/VIDEO-1/VIDEO-2/VIDEO-3/VIDEO-4/PC
Remote control buttons and functions
Adjust the volume
" OUT OF RANGE"
See "Troubleshooting" on page 36 for details of this message.
If the program being watched does not have Teletext
transmission, only a box will be displayed at the same
location.
When watching videos, an incorrect current time is
sometime displayed.
In PC mode, the current time will not be displayed.
In DTV mode, only information plate will be displayed.
Hyper Surround
TV mode
EXT mode
Last
program
number
DTV
VIDEO-1
PC
VIDEO-2
VIDEO-3
VIDEO-4
VIDEO-1
TV
01
VIDEO-1
Signal source
To Next Page
Loading...
Need help?
General
