8
NOW you are ready to plug in the unit and
other connected equipment.
Canceling the Display Demonstration
When connecting the AC power cord into a wall outlet, the
unit automatically starts the display demonstration.
On the unit ONLY:
To cancel the display demonstration,
Press and hold DEMO for 2 seconds while
the display demonstration is shown on the
display until “DEMO OFF” is displayed.
When you press other buttons
The display demonstration stops temporarily. It will start
automatically again (if no operation is done for 2 minutes) until you
cancel it.
To start the display demonstration manually
Press and hold DEMO again for more than 2
seconds.
MXC55[J]_01-08.p65 2/16/06, 2:46 PM8
To Next Page
Loading...
