JVC MX-GA9V - Page 20

1-20 (No.MB011)
Fig.6
Fig.7
Fig.8
Fig.9
3.3.3 Removing the CD loading mechanism assembly
(See Fig.10)
(1) While turning the cams R1 and R2 assembly in the arrow
direction h ,align the shaft i of the CD loading mechanism
assembly to the position shown in Fig.10.
(2) Remove the four screws F retaining the CD loading mech-
anism assembly.
Fig.10
CD tray assembly
f
Refer to Fig.7
Pawl
Chassis assembly
g
Drive unit of elevato
r
CD 3
CD 2
CD 1
Pulley gear
Motor pulley
Pawl g, g'
CD tray assembly
Cams R1, R2 assembly
i
CD loading mechanism assembly
h
F
F
F
F
A
rrow