Need help?Do you have a question about the JVC MX-J750R and is the answer not in the manual?
General safety instructions for handling the equipment and avoiding hazards.
Procedure for checking leakage current to prevent electrical shock hazards during servicing.
Important safety information and warnings related to Class 1 laser products.
Guidelines for grounding the workbench and yourself to prevent static discharge damage.
Precautions for handling the optical pickup and traverse unit during servicing.
Precautions to take when disassembling the unit and replacing parts, focusing on electrical safety.
Specific instructions related to the SP-MXJ750R model.
Information about the purpose and content of the service manual.
Precautions to be observed during the installation process.
Identification and description of controls on the front panel and the display window.
Diagram and explanation of the remote control buttons and functions.
Introduction to the initial setup and basic operations of the unit.
Instructions for connecting speakers, antenna, and other external equipment.
Steps for turning the unit on for the first time.
Procedures for setting the clock display and adjusting the audio volume.
Explanation of how to adjust bass and treble settings for sound output.
Instructions on how to listen to and tune FM/AM radio stations.
How to test and operate preset radio station functions.
Details on RDS features, including searching programs and changing information display.
Instructions for loading CDs and basic playback operations.
How to play back multiple discs continuously.
Steps to program a custom playback order for CDs.
Instructions for playing audio from cassette tapes.
Procedures for recording audio onto cassette tapes.
Steps for dubbing audio content from a CD to a cassette tape.
Instructions for copying audio between cassette tapes.
Explanation of the auto recording feature for cassettes.
Details on recording modes like reverse and normal for cassette tapes.
General instructions for operating the unit's timer functions.
Steps for setting up automatic recording timers.
Procedures for setting the desired timer activation times.
Specific instructions for using the daily timer function.
Detailed explanation of the timer's operational logic and sequence.
Explanation of how timer priorities are handled when multiple timers are set.
Procedures for maintaining the CD drive mechanism.
Guidelines for handling and maintaining cassette tapes and mechanisms.
Common problems and their solutions, including no sound or disc playback issues.
Further common problems and solutions, such as speaker output and disc play issues.
Explanation of Program Type (PTY) codes used for FM radio stations.
Technical specifications for the amplifier section of the unit.
Technical specifications related to the CD playback functionality.
Technical specifications for the cassette deck mechanism.
Essential safety instructions for operating and maintaining the system.
General overview of how to connect various components to the system.
Instructions for connecting external speakers and the AM antenna.
Guidance on connecting external audio devices and accessories.
Procedure for turning the system's power on and off.
Steps for setting the system clock and adjusting the audio volume.
How to adjust the bass and treble for customized sound output.
Instructions for tuning and listening to FM/AM radio stations.
Detailed explanation of the tone control functions.
How to set up and use preset radio stations.
Information and steps for receiving Radio Data System (RDS) broadcasts.
Details on RDS program type, station name, and text information.
Instructions for loading CDs and initiating playback.
How to play multiple discs continuously without interruption.
Steps for programming a custom playback sequence for CDs.
Instructions for playing cassette tapes.
Procedures for recording audio onto cassette tapes.
Continuation of tape recording instructions.
Introduction to the adjustment procedures for the tape mechanism.
List of measurement tools and requirements for adjusting the unit.
Specific conditions and settings required for performing measurements.
Parameters for the radio input signal used during adjustments.
Information on using frequency counters and wow flutter meters for measurements.
Procedures and specifications for using test tapes.
Method for adjusting the recording bias current.
Procedure for adjusting recording and playback frequency characteristics.
Procedure for diagnosing system issues using an extension wire method.
Steps for diagnosing problems related to the system control P.C. board.
Flowchart detailing the operational steps until TOC (Table of Contents) is read.
Instructions for cleaning the laser pickup lens and information on laser diode lifespan.
Procedure for replacing the laser pickup unit.
Description of the AN8806SB-W IC, including pin layout and block diagram.
Description of the BA6897FP-W IC (4-channel driver), including pin layout and block diagram.
Description of the BA3837 IC (MIC Mixer), including block diagram and pin function.
Description of the BA15218 IC (OP AMP), including block diagram.
Description of the BU4094BCF-X IC (Serial to parallel port extension).
Description of the GP1U281X IC (Receiver for remote controller), including block diagram.
Description of the LA1838 IC (FM AM IF AMP & detector), including block diagram and pin function.
Description of the LC72136N IC (PLL Frequency synthesizer), including pin layout and block diagram.
Description of the TDA7439 IC (Control volume), including pin layout and block diagram.
Description of the MN101CP35DEA IC (System controller), including pin function (1/2).
Description of the MN101CP35DEA IC (System controller), including pin function (2/2).
Description of the MN35510 IC (Digital Servo/Signal Processor), including terminal layout and block diagram.
Detailed pin function list for the MN35510 IC.
Description of the UPD780055GC011 IC (CD Changer Control), including terminal layout and pin function.
Description of the BU9253AS IC (LP&ECHO MIX), including pin layout, block diagram, and pin function.
Description of the LB1641 IC (DC Motor Driver), including pin layout and functions.
Description of the TA8409S IC (Motor Driver), including pin layout and function.
Continuation of TA8409S IC (Motor Driver) description.
Description of the NJM4580L IC (Mic Amplifier).
Description of the BA3835S IC (SPI B.P.F.), including block diagrams and pin function.
Description of the BU4094BC IC (Serial to parallel port extension), including pin layout and block diagram.
Description of the LA72723 IC (RDS demodulation), including pin layout and block diagram.
Block diagram illustrating the main, cassette, and CD sections of the system.
Schematic diagram for the power transformer section of the unit.
Key explaining model number designations used in the schema.
Key indicating the sheet numbering system for schematics.
Key explaining the version codes used for different regional models.
Layout diagram of the main and preamplifier printed circuit board.
Layout diagram of the input/output and power board.
Layout diagram for the CD tray section switch board.
Layout diagram for the cam switch board.
Layout diagram of the CD servo control board.
Layout diagram of the cassette mechanism control board.
Layout diagram of the tuner board.
Table of contents for the parts list section.
Exploded view illustration of the general assembly with numbered parts.
List of general assembly parts with part numbers and descriptions.
List of parts for the CD changer mechanism assembly.
Detailed parts list specific to the CD changer mechanism.
List of parts comprising the CD mechanism assembly.
List of parts for the cassette mechanism assembly.
Diagrams indicating specific points where grease should be applied.
List of packing materials for the MX-J700 model.
List of accessories included with the MX-J700 model.
List of packing materials for CA-MXJ700 and SP-MXJ750R models.
List of accessories for CA-MXJ700 and SP-MXJ750R models.
To Next Page
General
