JVC MX-K30 - Physical and Power Information

0302NNMCREBET
EN
VICTOR COMPANY OF JAPAN, LIMITED
Specifications
Amplifier
Output Power
CA-MXK30 80 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more
than 10% total harmonic distortion
CA-MXK10 40 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more
than 10% total harmonic distortion
Input Sensitivity/Impedance (1 kHz)
AUX IN 300 mV/50 kΩ
Speaker terminals 6 - 16 Ω
Phones 32 Ω - 1 kΩ
15 mW/ch output into 32 Ω
Cassette Deck Section
Frequency Response
Type I (NORMAL) 63 - 12 500 Hz
Wow And Flutter 0.15% (WRMS)
CD Player
CD Capacity 3 CDs
Dynamic Range 85 dB
Signal-To-Noise Ratio 90 dB
Wow And Flutter Unmeasurable
Tuner
FM Tuner
Tuning Range 87.5 MHz - 108.0 MHz
AM Tuner
Tuning Range 530 kHz - 1 710 kHz
Unit
Dimensions
CA-MXK30 270 mm
✕
305 mm
✕
430 mm (W/H/D)
(10-2/5"
✕
12"
✕
16-15/16")
CA-MXK10 270 mm ✕
305 mm
✕
386 mm (W/H/D)
(10-2/5" ✕
12"
✕
15-1/4")
Mass
CA-MXK30 Approx. 7.5 kg (16.5 lbs)
CA-MXK10 Approx. 6.6 kg (14.5 lbs)
Speaker Specifications (each unit)
SP-MXK30
Type 3-way bass-reflex type
Speaker Unit Woofer: 13.5 cm (5-1/4") cone
✕
1
Mid: 5cm (2") cone ✕
1
Tweeter: 2 cm (3/4") dome ✕
1
SP-MXK10
Type 2-way bass-reflex type
Speaker Unit Woofer: 13.5 cm (5-1/4") cone
✕
1
Tweeter: 5 cm (2") cone ✕
1
Power Handling Capacity
SP-MXK30 80 W
SP-MXK10 40 W
Impedance 6 Ω
Frequency Range 45 - 22,000 Hz
Sound pressure level 88 dB/W·m
Dimensions 225 mm
✕
305 mm
✕
245 mm (W/H/D)
(8-7/8" ✕
12-3/16"
✕
9-11/16")
SP-MXK30 Mass Approx. 2.98 kg (6.5 lbs)
SP-MXK10 Mass Approx. 2.67 kg (5.8 lbs)
Accessories
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
Power Specifications
Power Requirements AC 120 V , 60 Hz
Power Consumption
CA-MXK30 135 W (power on mode)
10 W (in Standby mode)
CA-MXK10 65 W (power on mode)
6.5 W (in Standby mode)
Design and specifications are subject to change without notice.
Back cover.fm Page 1 Thursday, March 7, 2002 5:40 PM