JVC MX-KA3

JVC
COMPACT COMPONENT SYSTEM
MX-KA3
Consists of CA-MXKA3 and SP-MXKA3
m
SP-MXKA3
CA-MXKA3
SP-MXKA3
DIGITAL AUDIO
INSTRUCTIONS
For Customer Use:
Enter betow the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1013-001A
[4

JVC MX-KA3 Specifications

General

Output Power	80 W per channel
Input Sensitivity/Impedance	300 mV/50 kΩ
Frequency Response	63 Hz - 12, 500 Hz
Wow And Flutter	0.15% (WRMS)
CD Capacity	3 CDs
Dynamic Range	85 dB
Signal-To-Noise Ratio	85 dB
FM Tuner Tuning Range	87.5 MHz - 108.0 MHz
AM Tuner Tuning Range	530 kHz - 1, 710 kHz
Dimensions	267 mm x 305 mm x 433 mm
Mass	7.5 kg
Type	3-way bass-reflex type
Woofer	13.5 cm cone
Mid	5 cm cone
Tweeter	2 cm dome
Power Handling Capacity	80 W
Impedance	6 Ω
Frequency Range	45 Hz - 22, 000 Hz
Sound pressure level	89 dB/W.m
Dimensions	228 mm x 316 mm x 258 mm
Mass	3.1 kg
Power Requirements	AC 120 V, 60 Hz
Power Consumption	125 W (power on mode)
Power Consumption in Standby Mode	17 W

Summary

Warnings, Cautions and Others

Basic Operations

Powering On and Off

How to turn the system on and off using the power button.

Adjusting Volume

How to control the audio volume using the unit and remote.

Using the Tuner

Tuning In a Station

Manual, auto, and preset tuning methods for radio stations.

Presetting Radio Stations

How to store up to 45 FM/AM stations in memory.

Using the CD Player

CD One Touch Play

Starting CD playback with a single touch.

Loading and Unloading CDs

Procedures for inserting and removing CDs from the tray.

Normal CD Playback

Playing all tracks continuously on one or multiple CDs.

Selecting Tracks and Search Play

Skipping tracks, pausing, and fast-forwarding/rewinding within a CD.

Programming CD Track Order

Creating a custom playback sequence for CD tracks.

Random and Repeat Play

Playing tracks in random order or repeating specific tracks/all tracks.

Using the Cassette Deck (Listening to a Tape)

Cassette Tape Playback

How to insert and play audio tapes in either deck.

Using the Cassette Deck (Recording)

Standard Tape Recording

Basic procedure for recording any sound source onto tape.

CD Synchro Recording

Automatically recording entire CDs or programmed tracks onto tape.

Tape to Tape Dubbing

Copying audio from one cassette tape to another.

Using an External Equipment

Listening to External Sources

How to play audio from connected external devices.

Using the Timers

Setting the Clock

How to set the system's internal clock accurately.

Setting the Daily Timer

Programming the system to turn on/off and play a source daily.

Setting the Recording Timer

Scheduling unattended recording of radio broadcasts.

Managing Daily Timer Settings

How to temporarily cancel or reactivate the Daily Timer.

Managing Recording Timer Settings

Setting the Sleep Timer

Setting the system to turn off automatically after a set time.

Care and Maintenance

Troubleshooting

Common System Issues and Solutions

A guide to resolving common problems with the system.