l/
000
,,IVI_
SLEEP
CLOCK/TIMER
] ,
SET
SLEEP indicator REC (Recording) Timer indicator
Timer indicator DAILY Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section
The timers lets you control recoMing and listening functions auto-
matically.
'I hree types of timers are available:
DALLY Timer
Use this timer to set wake up everyday to music from any
source, instead of an alarm clock.
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the
starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automa/ically after
a certain length of time.
Setting the Clock
When you plug the AC power cord into the wall outlet, the time in-
dication "AM 12:00" blinks on the display.
You can set the clock whether the System is on or off.
• The clock must be correctly set for the timers to work.
• Each setting step must be completed within approx, two
minutes, Otherwise, the setting is cleared and must be re-
peated from the beginning.
• The clock may gain or lose one to two minutes per month
Using the Unit
1 Press the CLOCK/TIMER button.
The horn digit of the time indication blinks on the display.
• If the clock is ah-eady set and "AM 12:00" is not blinking,
press the CLOCKfFIMER bulton repeatedly until clock set-
ting display appears on the display. (In the clock setting
display, the hour digits of the current clock blink on the dis-
play. )
• If the clock is already set, tile display changes as follows
each time you press the CLOCK/TIMER button,
TIMER -* ON TIME -* REC -* ON TIME -* Clock setting
display -* Canceled -* (back to the beginning)
2 Press the 1<14<1or I_1_t button to set the hour.
Pressing the I,_1_tbutton moves the time forwards and pressing
the b<141button moves it backwards. Holding down the button
moves the hour rapidly.
3
4
5
Press the SET button.
'[he minute digits of the time indication blink on the display.
• To return to the hour setting, press the CANCEL button.
Press the 1<14<1or _ button to set the
minute.
Press the SET button.
CLOCK OK appea's on the display. Then, the selected time
is set and the seconds start counting from O.
CA UTION:
• If there is a power failure, the clock loses its set-
ting immediately. "AM 12:00" blinks on the dis-
play and the clock must be reset.
2O
To Next Page
Loading...
Need help?
General
