JVC NX-F7

Listening to radio broadcasts
16
*
For the number button usage, refer to “Using the
number buttons” on page 12.
■ IMPORTANT
• Slide the remote control mode
selector to [AUDIO].
AM stations are spaced 9 kHz apart in some coun-
tries and 10 kHz in other countries.
■ When the main unit is turned off
To select 10 kHz spacing, while holding down
¢, press F on the main unit to turn on the
power. “10K STEP” appears in the display win-
dow.
To select 9 kHz spacing, while holding down
4, press F on the main unit to turn on the
power. “9K STEP” appears in the display win-
dow.
NOTE
• When the spacing is switched, the preset radio
station memory is erased.
1 Press [FM/AM] to select “FM” or
“AM” in the display window.
• Pressing [FM/AM] selects a radio broadcast
as the sound source.
• Repeatedly pressing [SOURCE] on the
main unit can also select a radio broadcast
as the source.
• Each time you press [FM/AM], the band tog-
gles between “FM” and “AM”.
Example: When an FM radio broadcast is
received
(Continued on the next page)
Number
buttons
*
Remote control
mode selector
Setting the AM tuner spacing
Selecting a radio station
Frequency
Stereo indicator
Preset number
(Refer to page 17.)
Listening to radio broadcasts
NX-F3_NX-F7[A]EN.book Page 16 Tuesday, April 22, 2008 1:55 PM