To Next Page

To Previous Page

INTRO

Press the PROG./M/P-MODE button in play mode till the “INTRO” shows steadily on the

display, the intro play will start and scan 10 seconds for every track. To cancel intro play, press

the PROG./M/P-MODE button until “INTRO” disappear from the display.

USB OPERATION

1. Press the /FUNC. button to choose USB mode.

2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks and

folders stored in the USB. After reading the USB, the unit will start playback automatically.

3. Press the /STOP button on unit to stop playing. The display will show total number of

USB and folders.

4. Proceed repeat play (repeat 1- repeat folder - repeat all)/program play/skip up and back

operation as the same described in above CD/MP3 OPERATION.

CAUTION: Do not use any USB extension cable for connecting the USB bar which may cause harmful

interference.

BLUETOOTH OPERATION

1. Press the /FUNC. button to switch to BLUETOOTH function, the LCD will display

flashing “bt” at high speed.

2. Turn on the Bluetooth function on the device, scan the unit “JVC RC-E451W” or

“JVC RC-E451B” and connect, then input the password 0000 if required, the “bt” will show

steadily to indicate connection done. Press the /SCAN/PAIR button on the unit or play

key on the device to start playback.

3. If the unit can‘t connect the relative Bluetooth within

2 minutes, press and hold the /SCAN/PAIR button on unit to reconnect.

4. Press the VOL.+/- buttons to select your desired level.

5. Press /TUN+ or /TUN- on the unit to choose the desired track.

6. To stop playback, press /SCAN/PAIR button.

Note: The Bluetooth works best within 10 meters.

AUX IN OPERATION

This unit provides a 3,5 mm AUX IN jack, through this jack other audio sources can be

connected to this unit and be amplied.

1. Connect the audio cable( cable not include) into the AUX IN jack and the other end

connects to the AUDIO OUT jack of the external audio source. The unit will change to AUX

mode automatically.

2. Adjust the volume of the main unit to your desired level.

3. Press PLAY of the external audio source (eg. MP3 player) to start playback.

JVC RC-E451B User Manual

Questions and Answers: