13
English
Presetting stations
You can preset 10 FM and 10 AM stations.
PUSH
PLAY/PAUS
E
STOP
MU
TING
H
B
S
/
P
R
ES
E
T
E
Q
P
R
O
G
R
A
M
/
C
L
O
C
K
S
E
T
A
d
d
"
/"
FM MODE
DISPLAY
TAPE
CD
BAND
RANDOM
TUN
ER
PRESET
CD REPEAT
2,6 3,5,64,61
There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 3
again.
Note:
In some cases, test frequencies have been already
memorized for the tuner since the factory examined the
tuner preset function before shipment. This is not a
malfunction. You can preset the stations you want into
memory by following the presetting method.
1
Press BAND/TUNER to select the band, FM or
AM.
2
Press 4 or ¢ to tune in the station you want to
preset.
3
Press PROGRAM/CLOCK SET.
The PROG indicator starts blinking in the display
window.
TUNER
PROG
FM
MHz
4
Press PRESET + / CD REPEAT or PRESET – to
select the preset number.
TUNER
PROG
FM
MHz
Preset number
5
Press PROGRAM/CLOCK SET.
The tuned station in step 2 is stored in the preset
number selected in step 4.
Storing a new station on a used number erases the
previously stored one.
6
Repeat steps 2 to 5 to preset other stations, using
different preset numbers.
Tuning in a preset station
1
Press BAND/TUNER to select the band, FM or
AM.
2
Press PRESET + / CD REPEAT or PRESET –
repeatedly until the desired preset number
appears.
Note:
If you unplug the AC power cord or if a power failure
occurs, the preset stations will be erased in a few days. If
this happens, preset the stations again.
02_01-20_RC-EX20SAB_J_En.p65 04.4.21, 2:46 PM13
To Next Page
Loading...
