To Next PageTo Next Page
Need help?Do you have a question about the JVC RX-E111RSL and is the answer not in the manual?
General| Weight | 3.2kg |
|---|---|
| Input sensitivity | 200mV |
| Output | 200mV (line) |
| Speaker load impedance | 6-16 ohms |
| Audio Formats Supported | Dolby Digital, DTS |
| Outputs | Line |
Section for recording model and serial number for future reference.
Detailed description of buttons, display, and connectors on the front panel.
Overview of all buttons and their functions on the remote control.
Essential precautions, placement, and environmental considerations before powering on.
Instructions for correctly inserting batteries into the remote control.
Checklist to ensure all included accessories are present in the package.
How to connect FM and AM antennas for optimal reception.
Instructions for connecting front, center, rear, and subwoofer speakers.
Detailed guide for connecting various audio and video sources.
Steps for safely connecting the device to a power source.
How to turn the device on and put it into standby mode.
Switching between different audio and video input sources.
Adjusting volume and connecting headphones for private listening.
Enabling TV Direct mode for direct audio/video signal transfer.
Setting the device to automatically remember settings for each source.
Operating Sleep Timer, Muting, and adjusting display brightness.
Setting up the digital input ports for various sources.
Choosing between analog and digital input modes for digital sources.
Setting up speaker parameters like size and type for surround sound.
Configuring whether a subwoofer is connected and its parameters.
Adjusting speaker distances for optimal surround sound timing.
Adjusting bass response (CROSS) and low-frequency effects (LFE).
Setting the volume level for the subwoofer.
Reducing high analog input signals to prevent distortion.
Adjusting the left-right balance for the front speakers.
Enhancing bass levels and adjusting treble/bass frequencies.
Manually finding and tuning radio stations.
Storing and recalling preset radio stations.
Choosing between AUTO MUTING and MONO for FM reception.
Tuning to RDS stations and viewing program service (PS) and radio text (RT).
Step-by-step guide to finding programs using PTY codes.
How the AF function automatically switches to the best signal for a station.
Overview of Dolby Surround, Pro Logic II, Dolby Digital, and DTS Digital Surround.
Activating or deactivating surround sound processing.
Choosing from various surround sound effects like PL II Movie or Music.
Fine-tuning the output levels for main, rear left, and rear right speakers.
Disabling surround sound and returning to stereo playback.
Setting the output levels for rear left and rear right speakers.
Operating surround sound modes directly from the device's front panel.
Basic remote functions for the main device.
Using the remote to control other JVC audio/video equipment.
Using remote buttons for station tuning and volume adjustments.
Utilizing RDS features via the remote control.
