To Next Page

To Previous Page

Setting Time in Standby mode

In STANDBY mode, the display will show “--:--”, and then “PRESS AND HOLD PAIR BUTTON TO

SET TIME“. Press and hold / PAIR on the unit or remote control to set the time.

1. Press VOL+/VOL– Button on the unit or remote control to set the hours, then press /

PAIR on the unit or remote control to conrm.

2. Press VOL+/VOL– Button on the unit or remote control to set the minutes, then / PAIR

on the unit or remote control to conrm.

3. The time is now set. When you switch the unit to STANDBY mode, the unit will show

STANDBY and then the time clock.

Automatic Power O Function

The unit automatically turns to STANDBY mode after 15 minutes if the TV or the external unit is

disconnected or switched o in OPTICAL mode or the volume is too close to mute in COAXIAL,

AUX, LINE IN and BT mode.

• To switch the unit o completely, remove the mains plug from the mains socket.

• Please turn the unit o completely to save energy when not in use.

Selecting Modes

Press SOURCE repeatedly on the main unit or remote control to switch between BT, Optical,

Coaxial, AUX and LINE IN mode.

Adjust the Speaker Level Settings and Eects

Adjusting Volume

• Press VOL+/VOL– on the unit or remote control to adjust the volume.

• If you wish to turn the sound o, press MUTE. The display will show “MUTE”. Press MUTE

again, or press VOL+/VOL– to resume normal listening.

Select Equaliser (EQ) Eect

Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control

to select the preset equaliser eects (CUSTOM/MOVIE/MUSIC).

• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch into MOVIE

EQ eect.

• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ eect.

Adjusting the Bass/Treble Level in CUSTOM EQ mode

1. Press EQ button on the unit repeatedly, or press CUSTOM button on the remote control to

select default EQ mode.

2. Press BASS/TREBLE on the remote control. The display will show the current BASS/TREB

level.

3. Press VOL+/VOL– on the unit or remote control to adjust the bass/treble level (–03 to +03).

The unit will exit from BASS/TREBLE setup after idle for about 5 seconds.

TH-W513B_IB_Final171124V5.indd 15 24/11/2017 3:58 PM

JVC TH-W513B User Manual

Questions and Answers: