19
Follow the procedures below to connect/set this unit.
Turn off the power of devices to be used before connecting the cables.
K
K
K
K
K
Flow for Connection/Settings
step 1
Mounting the lens (A Pg. 20)
Mount the lens.
step 2
Connecting the back panel (A Pg. 22)
Connect the control signal cable, video signal coaxial cable
and the like.
step 3
Mounting the camera (A Pg. 25)
Mount the camera to the mounting location.
step 4
Adjusting the back focus (A Pg. 28)
Adjust the back focus.
step 5
Adjusting the lens (A Pg. 30)
Adjust the lens.
step 6
Adjusting the auto white balance (A Pg. 32)
TK-C1530_EN.book Page 19 Friday, August 24, 2007 9:29 AM
To Next Page
Loading...
