JVC UX-A4 - Tuner;Deck section

UX-A4 B/E/G/GI/EN
Tuner/Deck section
@ FM MODE button
@ TUNER/BAND bution
Press to select the tuner mode.
Press to select the band (FM/AM (MW/LW)).
© Display window
Band Indicator (FM/AM (MW/LW))
Radio frequency display
G) MONO indicator
@ STEREO indicator
(5) Preset stalion display
(6) Reverse mode indicator ( = / 32> /C2>)
() Tape mode display
(8) Tape direction indicator (~<, >)
(3) Recording indicator (REC)
(0) DOLBY NR indicator (DOLBY NR)
@ Tuning button (UP/DOWN)
© Cassatte holder
@
Headphones
jack
(PHONES)
(3.5
mm
dia,
stereo
mini)
Connect headphones (impedance 162 - 1kS2) to this
jack. The speakers are automatically switched off when
the headphones are connected.
@ REVERSE MODE switch
= : For single-side recording or playback
=~: For both-sides recording or playback
C=): For continuous play
© DOLBY NRA button
Set to ON when recording or playing back tapes using
the noise reduction system.
© Cassette operation buttons
: Press to fast wind the tape from right to
lef/Music scan.
: Press to play back the tape In the
reverse direction.
: Press to stop the tape.
This also sets the TAPE mode.
: Press to play back the tape In the forward
direction.
: Press to fast wind the tape from left to
right/Music scan.
@/31REC : Press to set the unit to the record or
record-pause mode.
CD SYNCHRO REC : Press to start CD edit recording/
synchro recording.
@ EJECT button
yon es
(No. 1890) 7