15
Adjust the Speaker Level Settings and Eects
Adjusting the Volume
To increase or decrease the volume, turn the VOLUME+/– dial on the unit or press the
VOL+/– button on the remote control.
Mute Sound
If you wish to turn the sound o, press button. Press button again, or turn the
VOLUME+/– dial on the unit, or press VOL+/– button to resume normal listening.
Preset Equalizer
You can adjust the sound reproduced simply by choosing from 5 preset equalizers.
During play, press the EQ button on the remote control repeatedly to select: FLAT / JAZZ /
CLASSIC / ROCK / POP.
System Settings
Make sure that the unit is in DAB or FM mode for system settings.
System Reset
If you want to delete all your stations and settings, you can return your radio back to the
default setting by running a System Reset.
1. In DAB or FM mode, press and hold
on the unit or press REPEAT/MENU on the
remote control, and then press
/ or / on the unit, or TUNE+/TUNE– on
the remote control to select <SYSTEM>. Press
on the unit or OK/
on the remote
control to conrm.
2. Press
/ or / on the unit, or TUNE+/TUNE– on the remote control to select
<RESET>. Press
on the unit or OK/
on the remote control to conrm.
3. Press
/ or / on the unit, or TUNE+/TUNE– on the remote control to select Y,
and then press
on the unit or OK/
on the remote control to conrm.
After system reset, all tuned stations, preset stations and alarm settings will be erased then your radio will
switch back on.
Software Version
This information may be requested when dealing with technical support issues.
1. In DAB or FM mode, Press and hold
on the unit or press REPEAT/MENU on the
remote control, and then press
/ or / on the unit, or TUNE+/TUNE– on
the remote control to select <SYSTEM>. Press
on the unit or OK/
on the remote
control to conrm.
2. Press
/ or / on the unit, or TUNE+/TUNE– on the remote control to select
<SW VER>. Press on the unit or OK/ on the remote control to conrm.
UX-D327B_IB_Final200407V5.indd 15 08/04/2020 16:24
To Next Page
Loading...
Need help?
General
